T15 Steel | 1.3202 | HS12-1-5-5 | SKH10 | W12Cr4V5Co5 HSS Tool Steel

Reference standard:  ASTM A600, DIN 17350, EN ISO 4957, JIS G 4805, GB/T 9943, SS14

AISI/ SAE T15 Steel is Tungsten type containing cobalt high speed steel, red hardness and high temperature hardness and wear ability Than T4/ W18Cr4VCo5 steel is high, but the toughness is low, after quenching, surface hardness is 63-68 HRC. Used as materials in more than 400 HRb hardness under complex conditions (heavy duty) work of turning tool, milling cutter, cutter, etc. We supply the T15 steel round bar, flat, square, sheet, rods, rings, Etc.

Download Full Datasheet


Chemical composition of SAE T15 HSS steel AISI High Speed Steel

ASTM A681 C Si Mn P S Cr Mo V W Co
T15 / T152015 1.50~1.60 0.15~0.40 0.15~0.40 0.030 Max 0.030 Max 3.75~5.00 ≤1.00 4.50~5.25 11.75~13.0 4.75~5.25
DIN 17350 C Si Mn P S Cr Mo V w Co
1.3202 / HS12-1-5-5 1.30~1.45 ≤0.45 ≤0.40 0.030 Max 0.030 Max 3.80~4.50 0.70~1.00 3.50~4.00 11.50~12.50 4.50~5.00
JIS G4805 C Si Mn P S Cr Mo V w Co
SKH10 1.45~1.60 ≤0.45 ≤0.40 0.030 Max 0.030 Max 3.80~4.50 ~ 4.20~5.20 11.50~13.50 4.20~5.20
NF C Si Mn P S Cr Mo V w Co
HS12-1-5-5 1.50~1.65 ≤0.45 ≤0.40 0.030 Max 0.030 Max 4.00~4.50 0.70~1.00 4.75~5.35 11.5~13.0 4.50~5.20
GB/T 9943 C Si Mn P S Cr Mo V w Co
W12Cr4V5Co5 1.50~1.60 0.15~0.40 0.15~0.40 0.030 Max 0.030 Max 3.75~5.00 <1.00 4.50~5.25 11.75~13.00 4.75~5.25

SAE T15 steel equivalent with–HSS steel grade

  • AISI ASTM SAE T15 in USA HSS Steel material standard
  • NF HS12-1-5-5 in France Steel material standard
  • JIS SKH10- Japanese High Speed Steel Grade Standard
  • DIN HS12-1-5-5 HSS steel grade material
  • W-Nr 1.3202 HSS

Form of Supply

ASTM ASI – SAE T15 high speed tool steel, we can supply the round bar, flat bar, plate, hexagonal and square block. Diameters can be sawn to your required lengths as one offs or multiple cut pieces. Rectangular pieces can be sawn from flat bar or plate to your specific sizes. Ground tool steel bar and precision ground steel plate can be supplied, providing a quality precision finished bar to tight tolerances.


Applications

As a high quality HSS tool steel ASTM AISI – SAE T15 is very suitable for make complex blanking, high speed Drill bar, vibration and impact load of the mold: deep drawing die, punching die. Metal cutting saw blades, cold heading and extrusion tools. It have very good hot hardness.


Supply Range of SAE AISI T15 tool Steel

  • T15 steel round bar: diameter 2 mm to 1400mm
  • T15 steel plate:  Thickness 2mm to 1400mm
  • T15 steel falt bar: Thickness 2mm-200mm x 2mm-600mm x Length
  • T15 STEEL ASTM HIGH SPEED STEEL BAR.

Others have not specified size, pls contact our experienced sales team.


Forging of HSS T15 Tool steel-ASTM A681

Slowly Heat to 816-871 °C, Then rapid heating to 1180°C.keep the temperature to heat thoroughly. Start forging. Finished cool slowly. Below 980 °C no forging process.


Annealing of SAE AISI T15 tool steel material

Heat to 870-900°C, soak enough time, and ensure heat thoroughly. Then cool in the heat treatment furnace. After Annealing get Hardness 277 HRc Max.


Quenching of SAE T15 material

Preheat temperature /°C: 816 ~ 816

Quenching temperature /°C| salt bath furnace: 1200

Quenching temperature / °C | controlled atmosphere furnace: 1260


Tempering of T15 steel grade material

Tempering temperature /°C: 540 ~ 650

After tempering hardness HRc: 63-68

More T15 tool steel heat treatment data, please contact your heat treatment supplier.


Processing

We Provide the sawing cutting, Milled, polishing and make drill bar, Etc.

If you have any inquiry and problems, Please don’t hesitate to discuss with us.